Description
USES
AVCEM Grout-HS is used for grouting under the Bolt Pockets and base plates grouting for all equipment’s, all types of machinery in cement, textile, paper & steel industries, bridge bearing pads, columns, precast, construction.
ADVANTAGES
AVCEM Grout-HS is most economical and easy to use material requiring simple addition of , water. It is easy to mix and apply with high flow rapid strength development adjustable consistency ; high final strength up to 70N/mm2 (28 days) ;does not segregate and bleed impact on vibration resistance non-corrosive to steel and iron non-toxic and safe to handle.
APPLICATION
Measure water as per the requirement. Add AVCEM Grout-HS powder to it. Keep on mixing mechanically with a grout or concrete mixer, till a ’smooth and even consistency is achieved. Mixed grout should be used within 15 minutes of preparation. After initial hardening of grout, it should be kept damp either by Hessian cloth (It must be kept wet) or with water ponding for a minimum period of 7 days. Water and powder ratio varies from 0.14 to 0.16 depending on the
consistency requirement at the site. 25 kg. will yield approximately 12.5 litre fluid grout.
PROPERTIES
| Form | Grey free flow Powder |
| Density | 2200 to 2300 kg/cubicmtr. |
| Expansion | 0.1 to 0.5 % |
| Compressive Strength at 27*C (approx.) After 3 days | 40 N/mm’ (min) |
| After 28 days | 70 N/mm’ (min) |
Reviews
There are no reviews yet.